After Ubuntu has been installed, some of it's configuration files need to be modified. To simplify the setup, the default configuration of the UCS master domain controller should be copied to the Ubuntu system, for example:

# Become root
sudo bash

# Set the IP address of the UCS DC Master, 192.168.0.3 in this example
export MASTER_IP=192.168.0.3

mkdir /etc/univention
ssh root@${MASTER_IP} ucr shell |
    grep -v ^hostname= >/etc/univention/ucr_master
echo "master_ip=${MASTER_IP}" >>/etc/univention/ucr_master
. /etc/univention/ucr_master

echo "${MASTER_IP} ${ldap_master}" >>/etc/hosts

# Exit sudo bash
exit

In the default configuration of UCS only authenticated users can search in the LDAP directory. As such, the Ubuntu client needs an account in the UCS domain to gain read access to the LDAP directory:

# Become root
sudo bash

# Set some environment variables
. /etc/univention/ucr_master

# Download the SSL certificate
mkdir -p /etc/univention/ssl/ucsCA/
wget -O /etc/univention/ssl/ucsCA/CAcert.pem \
    http://${ldap_master}/ucs-root-ca.crt

# Create an account and save the password
password="$(tr -dc A-Za-z0-9_ </dev/urandom | head -c8)"
if [ "$version_version" = 3.0 ] && [ "$version_patchlevel" -lt 2 ]
then
    ssh root@${ldap_master} udm computers/managedclient create \
        --position "cn=computers,${ldap_base}" \
        --set name=$(hostname) --set password="${password}"
else
    ssh root@${ldap_master} udm computers/ubuntu create \
        --position "cn=computers,${ldap_base}" \
        --set name=$(hostname) --set password="${password}" \
        --set operatingSystem="$(lsb_release -is)" \
        --set operatingSystemVersion="$(lsb_release -rs)"
fi
echo "${password}" > /etc/ldap.secret

# Create ldap.conf
cat >/etc/ldap/ldap.conf <<__EOF__
TLS_CACERT /etc/univention/ssl/ucsCA/CAcert.pem
URI ldap://$ldap_master:7389
BASE $ldap_base
__EOF__

# Exit sudo bash
exit

SSSD provides a set of daemons to manage access to remote directories and authentication mechanisms.

# Become root
sudo bash

# Set some environment variables
. /etc/univention/ucr_master

# Install SSSD based configuration
DEBIAN_FRONTEND=noninteractive apt-get -y install sssd

# Create sssd.conf
cat >/etc/sssd/sssd.conf <<__EOF__
[sssd]
config_file_version = 2
reconnection_retries = 3
sbus_timeout = 30
services = nss, pam, sudo
domains = $kerberos_realm

[nss]
reconnection_retries = 3

[pam]
reconnection_retries = 3

[domain/$kerberos_realm]
auth_provider = krb5
krb5_kdcip = ${master_ip}
krb5_realm = ${kerberos_realm}
krb5_server = ${ldap_master}
krb5_kpasswd = ${ldap_master}
id_provider = ldap
ldap_uri = ldap://${ldap_master}:7389
ldap_search_base = ${ldap_base}
ldap_tls_reqcert = never
ldap_tls_cacert = /etc/univention/ssl/ucsCA/CAcert.pem
cache_credentials = true
enumerate = true
ldap_default_bind_dn = cn=$(hostname),cn=computers,${ldap_base}
ldap_default_authtok_type = password
ldap_default_authtok = $(cat /etc/ldap.secret)
__EOF__
chmod 600 /etc/sssd/sssd.conf

# Install auth-client-config
DEBIAN_FRONTEND=noninteractive apt-get -y install auth-client-config

# Create an auth config profile for sssd
cat >/etc/auth-client-config/profile.d/sss <<__EOF__
[sss]
nss_passwd=   passwd:   compat sss
nss_group=    group:    compat sss
nss_shadow=   shadow:   compat
nss_netgroup= netgroup: nis

pam_auth=
	auth [success=3 default=ignore] pam_unix.so nullok_secure \
		try_first_pass
	auth requisite pam_succeed_if.so uid >= 500 quiet
	auth [success=1 default=ignore] pam_sss.so use_first_pass
	auth requisite pam_deny.so
	auth required pam_permit.so

pam_account=
	account required pam_unix.so
	account sufficient pam_localuser.so
	account sufficient pam_succeed_if.so uid < 500 quiet
	account [default=bad success=ok user_unknown=ignore] pam_sss.so
	account required pam_permit.so

pam_password=
	password sufficient pam_unix.so obscure sha512
	password sufficient pam_sss.so use_authtok
	password required pam_deny.so

pam_session=
	session required pam_mkhomedir.so skel=/etc/skel/ umask=0077
	session optional pam_keyinit.so revoke
	session required pam_limits.so
	session [success=1 default=ignore] pam_sss.so
	session required pam_unix.so
__EOF__
auth-client-config -n -a -p sss

# Start sssd
service sssd start

# Exit sudo bash
exit

The commands getent passwd and getent group should now also display all users and groups of the UCS domain.

The home directory of a user should be created automatically during login:

# Become root
sudo bash

cat >/usr/share/pam-configs/ucs_mkhomedir <<__EOF__
Name: activate mkhomedir
Default: yes
Priority: 900
Session-Type: Additional
Session:
    required    pam_mkhomedir.so umask=0022 skel=/etc/skel
__EOF__

DEBIAN_FRONTEND=noninteractive pam-auth-update

exit

During login users should also be added to some system groups:

# Become root
sudo bash

echo '*;*;*;Al0000-2400;audio,cdrom,dialout,floppy,plugdev,adm' \
   >>/etc/security/group.conf

cat >>/usr/share/pam-configs/local_groups <<__EOF__
Name: activate /etc/security/group.conf
Default: yes
Priority: 900
Auth-Type: Primary
Auth:
    required    pam_group.so use_first_pass
__EOF__

DEBIAN_FRONTEND=noninteractive pam-auth-update

exit

By default the Ubuntu login manager only displays a list of local users during login. After adding the following lines an arbitrary user name can be used:

# Become root
sudo bash

# Add a field for a user name
echo "greeter-show-manual-login=true" >>/etc/lightdm/lightdm.conf

# Optional: Disable the user selection at the login screen
echo "greeter-hide-users=true" >>/etc/lightdm/lightdm.conf

exit

Kubuntu 12.10 uses AccountService, a D-Bus interface for use account management, which ignores the /etc/lightdm.conf file. Since there is no config file for AccountService the login theme needs to be changed to classic under System Settings -> Login Screen (LightDM).

With these settings the login for domain members should be possible after a restart of LightDM or a reboot.

Every UCS domain provides a Kerberos domain. Since Kerberos relies on DNS, the Ubuntu client should use a UCS domain controller as its DNS server. The following steps provide an example configuration for Kerberos:

# Become root
sudo bash

# Set some environment variables
. /etc/univention/ucr_master

# Install required packages
DEBIAN_FRONTEND=noninteractive apt-get install -y heimdal-clients

# Default krb5.conf
cat >/etc/krb5.conf <<__EOF__
[libdefaults]
    default_realm = $kerberos_realm
    kdc_timesync = 1
    ccache_type = 4
    forwardable = true
    proxiable = true

[realms]
$kerberos_realm = {
   kdc = $master_ip $ldap_master
   admin_server = $master_ip $ldap_master
}
__EOF__

# Stop and disable the avahi daemon
service avahi-daemon stop
sed -i 's|start on (|start on (never and |' /etc/init/avahi-daemon.conf

# Synchronize the time with the UCS system
ntpdate $ldap_master

# Test Kerberos
kinit Administrator

# Requires domain password
krsh Administrator@$ldap_master ls /etc/univention

# Destroy the kerberos ticket
kdestroy

exit

It is currently not possible to change the user password at the LightDM login manager. Instead, the password can be changed via the kpasswd command after login or via the UMC module Change password.

A Computer: Linux object can be created in the UMC computer management. This allows the integration of the Unix system in the DNS/DHCP and network administration of the Univention Management Console

If the Nagios support is enabled under [Options], remote Nagios checks can also be applied against the system.

The Unix system should use a name server from the UCS domain: All UCS domain controllers (i.e., master domain controller, backup domain controller and slave domain controller) operate a DNS server. One or more of these UCS system should be entered in the /etc/resolv.conf, e.g.:

domain  example.com
nameserver  10.200.3.108
nameserver  10.200.3.99

All UCS domain controllers (i.e., master domain controller, backup domain controller and slave domain controller) operate a NTP server.

The configuration differs depending on the NTP software used, but is set under /etc/ntp.conf on most Linux systems, e.g.:

server master.example.com
server backup.example.com

The Name Service Switch (NSS) is an interface for configuring the data sources for users, groups and computers. NSS is present on all Linux versions and most Unix systems.

If the Unix system used provides support for an NSS module for LDAP access - as is the case in most Linux distributions - user and group information can be read out of the UCS LDAP directory.

The configuration files of the NSS LDAP module differ depending on the Linux/Unix version.

As a general rule, the following settings must be set there:

If the NSS LDAP service has been set up correctly, the following two commands should output all users and groups:

getent passwd
getent group

UCS employs the Kerberos implementation Heimdal. For this reason, Heimdal should also be used to access the Kerberos realm on the Unix system. Only the Heimdal client libraries need to be installed on the Unix system.

Kerberos requires correct time synchronisation, see Section 2.2.

The configuration is performed in the /etc/krb5.conf file on most systems. Here is an example configuration:

[libdefaults]
    default_realm = KERBEROSREALM
    default_tkt_enctypes = arcfour-hmac-md5 des-cbc-md5 des3-hmac-sha1 \
       des-cbc-crc des-cbc-md4 des3-cbc-sha1 aes128-cts-hmac-sha1-96   \
       aes256-cts-hmac-sha1-96
    permitted_enctypes = des3-hmac-sha1 des-cbc-crc des-cbc-md4 \
       des-cbc-md5 des3-cbc-sha1 arcfour-hmac-md5               \
       aes128-cts-hmac-sha1-96 aes256-cts-hmac-sha1-96
    allow_weak_crypto=true
    kdc_timesync = 1
    ccache_type = 4
    forwardable = true
    proxiable = true
    kdc_timesync = 1

[realms]
KERBEROSREAKM = {
   kdc = MASTERIP MASTERFQDN
   admin_server = MASTERIP MASTERFQDN
   kpasswd_server = MASTERIP MASTERFQDN
}

The Heimdal PAM module then needs to be installed. In general, the installation of the module should adapt the PAM configuration automatically.

Then Kerberos authentication during login should work via PAM and password changes should be possible via kpasswd.

To allow SSH logins via Kerberos, the options GSSAPIAuthentication and GSSAPIKeyExchange should be set to yes in the configuration file of the SSH daemon (typically /etc/ssh/sshd_config).

UCS uses the Common Unix Printing System (CUPS) to implement print services. The Unix system can use the UCS print servers by installing the CUPS client programs. In addition the CUPS server needs to be configured for the clients, typically in the configuration file /etc/cups/client.conf, e.g.:

ServerName printserver.example.com